Elastomeric insulating paint
Excellent acrylic impervious matter, with material with great elasticity for roofs. It creates a long-lasting adhesion to every masonry surface (concrete, brick, wood, metal, etc.) and presents excellent resistance to adverse weather conditions and UV radiation retaining its elasticity at temperatures ranging from -30oC to +100oC.
Surfaces should be clean and dry, free from dust, grease, etc. Cracks or joints should first be filled and then coated with Vitex's Durovit (transparent solvent-based primer) diluted 50 - 60% with Vitex's Brush Solvent T-300 or with Vitacryl roof insulating paint diluted 50% with water. Then we apply cross-wise two coats of Vitacryl roof insulating paint without dilution, allowing 24 hours between each coat application.
COLOURS It is available in white and oxide red shade.
PACKAGING It is available in 750 ml, 3 L and 10 L pails.
DRYING It is touch dry after 2 - 3 hours, depending on atmospheric conditions.
RECOATABILITY TIME It is recoatable after 24 to 48 hours, depending on atmospheric conditions.
SPREADING RATE 3 m2 / L per coat on properly prepared surfaces.
THINNING Dilute 5 - 10% with water for the first coat, while the second coat is without dilution.
APPLICATION Aplly by roller, brush or spray gun.
CLEANING OF TOOLS Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.
VOC (Volatile Organic Compounds) CONTENT
EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/c “Exterior walls of mineral substrate”, Type WB): 75 g/l (2007), 40 g/l (2010). This product contains maximum 15 g/l VOCs (ready for use product).
VISCOSITY 130 ± 10 K.U. (STORMER, 25oC).
DENSITY 1.30 ± 0.02 kg / L.
SOLIDS (% w/w) ~ 68 (ELOT 1028).
pH 8 - 9.
GLOSS 10 ± 3 units @ 60o (ELOT EN ISO 2813).
RECOATABILITY Excellent (ELOT 788).
ALKALI RESISTANCE No change (ELOT 788).
WATER RESISTANCE No change (ELOT 788).
WEATHERING Excellent. No film change (inflation, cracking, flaking, chalking, etc.). No shade or gloss change (ELOT EN ISO 2810).
MINIMUM APPLICATION TEMPERATURE 3oC (ELOT 788).
ELASTICITY Breaking elongation > 450% (ASTM D2370-98).
STORAGE 1 year in proper storage conditions (ideal storage temperature ranges from 5oC to 38oC).
HEALTH, SAFETY AND ENVIRONMENTAL ISSUES Keep out of reach of children. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains.
Stir well before use. Do not apply at temperature below 3oC, above 35oC and/or relative humidity above 80%. It is also suggested to avoid application when rain or frost is expected within the folowing 48 hours.